Bathroom Shelf

Lumber:

  • 3 – 2×2 at 6’
  • Half sheet of ¾” plywood

Materials:

  • Edge banding for plywood, optional
  • 4 – 8” angle brackets
  • 8 – 4″ or 5″ angle brackets
  • Spray paint to match finish (for brackets, optional)
  • Wood filler
  • Sandpaper
  • Wood glue
  • Finishing Supplies

Cut List:

  • 3 – 2×2 at 47-1/2” – Legs
  • 4 – ¾” plywood at 12” x 16” – Shelves

Instructions:

Cut the pieces for the shelves. Cut the notches and the curve using a jig saw. Apply edge banding, if desired.

Cut the pieces for the legs. Attach the shelves at the spacing shown using corner brackets. Three brackets per shelf will be used.

Fill any Screw, Nail or Pocket Holes, Sand and Finish as Desired

The original plan can be found at http://www.thedesignconfidential.com

 
Email This Page
 

(Visited 2 time, 1 visit today)

Most Popular Woodworking Plans